Medical Noninvasive/Reusable Oxygen/Breathing/Nasal/Niv/Maske Full Face CPAP Mask for Ventilation Machine
Full Face Mask, also known as Respiratory Mask, Ventilation Mask, Medical Total Face Oxygen Mask, Resuscitator Mask, Non-invasive ventilation mask is a full face mask, which is designed to diminish uncomfortable pressure on sensitive areas of the face. The wide field of view helps patients to feel more at ease while wearing a mask.
Resuscitator Mask Set Component
PC Mask Frame
Liquid Silicone Mask Cushion
PC Elbows
Silicone Flapper Valve
1.8 Miter Tubing Circuit
Mask Strap
| Category |
Adult Oxygen Mask |
| Material |
Medical PC + Liquid Silicone + Medical PP |
| Size |
19*19*11cm |
| Weight |
350g |
| One Set Includes |
PC Mask Frame, Silicone Mask Cushion, Headgears, Elbow, Flapper Valve, Connector |
| Custom Logo |
Printing Logo |
Application:
The Silicone Mask Seal Cushion is designed to provide protection for rescuer when manually resuscitating patients, using with automatic ventilators and manual resuscitators.
Medical plastic oxygen masks
Medical plastic oxygen masks are used primarily by medical care providers for oxygen therapy because they are disposable and so reduce cleaning costs and infection risks. Mask design can determine accuracy of oxygen delivered with many various medical situations requiring treatment with oxygen. Oxygen is naturally occurring in room air at 21% and higher percentages are often essential in medical treatment. Oxygen in these higher percentages is classified as a drug with too much oxygen being potentially harmful to a patient's health, resulting in oxygen dependence over time, and in extreme circumstances patient blindness. For these reasons oxygen therapy is closely monitored. Masks are light in weight and attached using an elasticated headband or ear loops. They are transparent for allowing the face to be visible for patient assessment by healthcare providers, and reducing a sensation of claustrophobia experienced by some patients when wearing an oxygen mask. The vast majority of patients having an operation will at some stage wear an oxygen mask; they may alternatively wear a nasal cannula but oxygen delivered in this way is less accurate and restricted in concentration.
Silicone and rubber masks
Silicone and rubber oxygen masks are heavier than plastic masks. They are designed to provide a good seal for long-duration use by aviators, medical research subjects, and hyperbaric chamber and other patients who require administration of pure oxygen, such decompression sickness victims. Dr. Arthur H. Bulbulian pioneered the first modern viable oxygen mask, worn by World War II pilots and used by hospitals.[1] Valves inside these tight-fitting masks control the flow of gases into and out of the masks, so that rebreathing of exhaled gas is minimised.
Hoses and tubing and oxygen regulators
Hoses or tubing connect an oxygen mask to the oxygen supply. Hoses are larger in diameter than tubing and can allow greater oxygen flow. When a hose is used it may have a ribbed or corrugated design to allow bending of the hose while preventing twisting and cutting off the oxygen flow. The quantity of oxygen delivered from the storage tank to the oxygen mask is controlled by a valve called a regulator. Some types of oxygen masks have a breathing bag made of plastic or rubber attached to the mask or oxygen supply hose to store a supply of oxygen to allow deep breathing without waste of oxygen with use of simple fixed flow regulators.
Oxygen masks for aviators
Applied Case
Aviation passenger masks and emergency oxygen systems |
Self-contained breathing apparatus (SCBA) |
Specialized masks for astronauts |
Specialized masks for pets |
Oxygen delivery to divers |
Anesthesia oxygen masks |
Masks for high-altitude climbers |
Oxygen helmets |
Mask retention systems |
We not only manufacture & sell standard size full face Ventilation Mask, but also offer customization service.
Information Required for OEM Service:
1. Offer 2D/3D designed drawings, samples or tell us your ideas.
2. Materials demands: silicone, rubber, LSR or other materials.
3. Material class demands: food grade, industrial grade, medical grade or flame-retardant materials.
4. Working environment: like working temperature, chemical environment, etc.
5. Hardness demands: 10-80 Shore A (Durometer).
6. Order quantity and anual order quantity.
Description:
1)They come with a transparent dome for visual check of bleeding, vomitus and spontaneous breathing, and a thumb rest for a tight, easy seal.
2)They eliminate the need for cleaning, disinfecting and sterilising.
3)They can be autoclaved repeatedly at 134°C.
4)Available more than 10 different sizes.
5)100% latex free.
Our Advantage:
1.Precision Mold-Making Technology (Since 1998)
2.Competitive Price: Origin Manufacturer.
3.Five experienced designers: offer technology/production/design/artwork support etc.
4.Production and Test strictly according to ISO9001.
5.Complete Production Plant, Equipment, Environment
Audited Supplier 
){kind=link}
){kind=link}